Fehlermeldungen Infini Hybrid-WR

Bei nachstehenden Meldungen sind nachstehende Massnahmen zu treffen:

1 Line voltage high loss  > Grid voltage is too high. 

2 Line voltage low loss > Grid voltage is too low. 

3 Line frequency high loss > Grid frequency is too high. 

4 Line frequency low loss > Grid frequency is too low. 

5 Line voltage loss for long time > Grid voltage is higher than 253V. 

6 Ground Loss > Ground wire is not detected. 

7 Island detect > Island operation is detected. 

8 Line waveform loss > The waveform of grid is not suitable for inverter. 

9 Line phase loss > The phase of grid is not in right sequence. 

10 EPO detected > EPO is open. 

11 Overload > Load exceeds rating value. 

12 Over temperature > The temperature is too high inside. 

13 Batter voltage low > Battery discharges to low alarm point. 

14 Battery under-voltage when grid is loss > Battery discharges to shutdown point. 

15 Battery open > Battery is unconnected or too low. 

16 Battery under-voltage when grid is OK > Battery stops discharging when the grid is OK. 

17 Solar over voltage > PV voltage is too high. 

Bei nachstehenden Fehleranzeigen (blinkend) ist der Fachinstallateur zu konsultieren:

Download
InfiniSolar-10KW-manual-20150130.pdf
Adobe Acrobat Dokument 2.5 MB
Download
Konformitätsnachweis WR mit Batterieeinheit
InfiniSolar 10k_VDE-AR-N-4105-EZE_U14-04
Adobe Acrobat Dokument 545.7 KB
Download
Konformitätsnachweis Integraler NA Schutz
InfiniSolar 10k_VDE-AR-N-4105-NA_U14-048
Adobe Acrobat Dokument 311.2 KB
Download
Auszug CE Testreport
AuszugCE_TestReport2015.pdf
Adobe Acrobat Dokument 8.6 MB